Share Group Limited
Products for Filtration, Separation, Sifting & Printing
Add to Cart
Transmission Oil Filter In Powershift Tractor Farming Equipment Strainer
The transmission oil filter is typically located in the hydraulic system or transmission housing of the tractor. Its primary function is to trap and remove any contaminants present in the transmission oil, including metal shavings, dirt, and other particles that can result from normal wear and tear or external factors.
Share Filters' transmission oil filters consist of a nylon or polyester filter mesh held in a polymer plastic frame, allowing for a more robust part giving more reliability and longevity in its usage. This injection moulding processing can take many forms and Share Filters is fully capable to help develop and produce the injection moulded filter product that will best suit your needs, as well as, offering any additional advice or service along the way.
Features:
ShareFilters Plastic Molded Filters Materials Options
| Rim frame material | PA6, PA66, PET, PP, ABS, and other thermoplastics |
| Filter media | Nylon mesh, polyester mesh, PP mesh, metallic mesh |
| Micron rating | 3μm - 1500μm |
| Mesh parts fabrication | Slitting, cutting, welding |
| Processing | Insert injection molding, over molding |
Other OEM Oil Filter
How To Select the Right Filter Mesh? You Can Follow These Points.
Nylon Filter Mesh Specification for Transmission Oil Filters
| Fabric number | Mest count | Thread diameter | Mesh opening | Open surface | Fabric thickness | Weight | |
| No. | mesh/cm | mesh/inch | micron | micron | % | micron | g/m2 |
| JPP9 | 9 | 24 | 250 | 860 | 60 | 455 | 145 |
| JPP10 | 10 | 25 | 300 | 700 | 49 | 576 | 195 |
| JPP12 | 12 | 30 | 250 | 583 | 49 | 470 | 162 |
| JPP12 | 12 | 30 | 300 | 533 | 41 | 585 | 234 |
| JPP14 | 14 | 35 | 300 | 414 | 34 | 595 | 273 |
| JPP16 | 16 | 40 | 200 | 425 | 46 | 370 | 139 |
| JPP16 | 16 | 40 | 250 | 375 | 36 | 485 | 217 |
| JPP20 | 20 | 50 | 150 | 350 | 49 | 375 | 98 |
| JPP20 | 20 | 50 | 200 | 300 | 36 | 385 | 173 |
| JPP24 | 24 | 60 | 150 | 267 | 41 | 285 | 117 |
| JPP28 | 28 | 70 | 120 | 237 | 44 | 215 | 87 |
| JPP30 | 30 | 76 | 120 | 213 | 41 | 225 | 94 |
| JPP32 | 32 | 80 | 100 | 213 | 46 | 165 | 69 |
| JPP36 | 36 | 90 | 100 | 178 | 41 | 178 | 78 |
| JPP40 | 40 | 100 | 100 | 150 | 36 | 190 | 87 |
| JPP43 | 43 | 110 | 80 | 152 | 43 | 135 | 60 |
| JPP48 | 48 | 120 | 80 | 130 | 38 | 145 | 62 |
| JPP56 | 56 | 140 | 60 | 120 | 44 | 85 | 44 |
| JPP59 | 59 | 150 | 60 | 110 | 42 | 98 | 46 |
| JPP64 | 64 | 160 | 60 | 100 | 37 | 105 | 50 |
Taizhou Share Filters, an OEM Mesh Insert Molded Filters Manufacture From China
As a filter meshes and plastic molded filters manufacture, Share Filters always find the best solution is to work with our OEM customers to collaborate on their mesh filtration product development projects before the final design prints are completed. Our experienced engineers are able to not only to meet your functional requirements, but also to recommend materials to improve performance and manufacturability. We will concentrate on the following:
| Consider Area | Factors | Outcoming | |
Filtration Media | | Select right material, weave type, pore size, thread diam, heat treatment, coatings | Filter media selected meets the required performance |
Component Design | | Consider supporting media, housing, end caps | The filtration components can perform well in indicated working condition |
Manufacturing Process | | Design lends itself to easy manufacture and economic cost | Produced at low cost of manufacture and high efficiency |
Quality Control | | Determine parameters and frequency of measurement | High quality, precision filter components |
Share Filters provide one-stop filter solution, we can supply filter meshes, filter mesh shapes, filter mesh tubes, and mesh insert injection molded filters and related fits.
Share Filters Workshops